Solder wick
- Product Code: solder
- Availability: In Stock
£7.95
- Ex Tax: £7.95
This is the braid we use in our own workshop and having tried many different brands we had this produced from a much finer wire than most others, it is also impregnated with MG Chemicals flux for more superior absorbtion.
- 3.5mm Width that is suitable for most applications, it comes in
- 1.5 metre length.
HOW TO USE
- Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
- Remove the desoldering wick after the solder has been absorbed.
- Cut off the used section of the wick using nippers.
- Repeat steps 1,2 and 3 if the solder is not removed completely.
Absorbability may differ depending on the type of solder.
We recommend using additional flux to aid with the wicking.